Hi Danny, As above you need to have the latest version of ContextCapture, if you then go to the toolbar at the top you will find tools > Create ContextCapture QR codes. The workflow if you don't know the coordinates until after is as follows: 1) Create Control Point QR Codes (3D coordinates to be defined) 2) Print off your QR codes (make sure they are big enough that you can make them out clearly in your pictures). 3) Lay them out on site, collect your GCPs and capture your site. 4) Submit AT under Positioning/Georeferencing choose "Use surveys from QR codes" (this will extract the QR code in the pictures) 5) After AT - Surveys tab and add the control point coordinates to the extracted GCPs. 6) Submit AT - Use control points for adjustment. Let me know if you have any trouble. Thanks, Jed
↧