Just looking at sample data .. versus yours: 1) need to import the optical properties and apply to the photogroup. There is an *.opt file in there - so right click on photogroup and import. 2) import positions - "," as delimiter, ignore first line, non-georeferenced, leave others unticked 3) run an AT .. keep camera calibration .. I usually set tie points to High 4) in the new AT'd block - import point cloud as static scans - I changed SRS to non-geo 5) check your 3D view to visually inspect alignment .. looked ok to me .. 5) re-run AT - try rigid or adjust for point cloud - your call - keep camera calibration again 6) recon .. stay tuned.
↧