Hi guys I can see how to import the location and orentation data for each image, but I would like to know how to import or set the accuracy of the location data. I'm importing images from the DJI Phantom 4 RTK and have accuracies for each photo. These values range from about 20mm to 3m depending on if it had RTK initialisation or not at the time. Pix4D automatically reads this information from the images. I am surveying with check points only, so the accuracy of the photos is very important. As a side issue version 4.4.11.60 does not recognise the camera parameters for the 'undistorted' images from the DJI Phantom 4 RTK. Cheers Caleb
↧