Here I am, a year and 1/3rd later and am still stuck. Running the most current Power InRoads which installs Descartes as an Application Add-in. I actually tried with the prior version and it failed, so I removed and installed the latest version. I also purposely di d not hook up out local workspace- so this was using simply the Out of the box Power InRoads with no workspace. Still having the same error. The goal, is to create an STM using a raster dem file from USGS. Then after determining my local project area, extract an InRoads DTM covering that area. With or without an attached GCS, I cannot assign a GCS to any STM I create. I cannot create one and later open it, nor create on and as part of the creation process, asign a GCS. There is a three icon menu when you try to assign during creation, of after the fact there is a menu to try and add a GCS. I can assign a GCS to my DGN file - the dialog open without problem. If I try to assign a GCS to an STM, the select GCS dialog box does not open. No error messages , nothing in the message center. You select the icon and I get a momentary wait icon (spinning circle) and then nothing. And without a GCS, the raster dem (*. IMG) file will not load because there is no CGS in the STM.
↧