Wiki Page: Bentley I/RASB Toolbars Disappear
Applies To Product(s): Bentley I/RAS B Version(s): 08.05.02.63 Environment: N\A Area: General Subarea: N\A Original Author: Frank McAllister, Bentley Technical Support Group Problem Description I have...
View ArticleWiki Page: Reality Modeling Cloud Service - Troubleshooting
Reality Modeling Cloud Service troubleshooting
View ArticleWiki Page: Upload Failed due to insufficient permissions
Workflow: In ContextCapture Console. User clicks “Submit Processing” in the “3D Model Processing” dialog. Problem: Upload fails and user received following error message: Solution: The user needs to...
View ArticleForum Post: RE: Context Capture Version
Latest version of ContextCapture is 04.04.09.516 (update9). You can get it via the Fulfillment center.
View ArticleForum Post: RE: Hardware for ContextCapture
You can find more information about this in CC user manual p.23 and p.24 about System requirements and Multi GPU mode. CC can use Multi GPU but not the SLI...
View ArticleWiki Page: ContextCapture Multi GPU (Vulkan) vs SLI (Nvidia)
As describe in user manual (p.24), CC can take advantage of multiple graphic cards. User shall be aware that SLI mode should not be use with ContextCapture as a results of slow performances and...
View ArticleForum Post: RE: [Contextcapture] Free up disk space tool
It won’t impact the AT and production data that have been already computed. Only the temporary data needed to compute AT and productions will be removed. If you use this cleanup tool and if you run a...
View ArticleForum Post: RE: CCEditor: Marque de découpage sur ortho
Bonjour Mathieu, En farfouillant un peu, j'ai trouvé la solution: Dans Raster Manager/Edit/Merge, section "Résolution", il faut sélectionner "Number of Pixels and DPI". (Ce que je n'avais pas fait...
View ArticleForum Post: RE: Publishing 3D model
Hi, With the latest versions of ContextCapture the preferred formats for web publishing is Cesium 3D Tiles. You can find more info about Cesium technology here : https://cesiumjs.org/ . HTH, Mathieu
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Hi Mathieu, I tried today, and the option is available now... didn't do anything special, exactly the same procedure than the other day... The creation of the new file failed.
View ArticleForum Post: RE: cleaning cloud points without classification
HI Pawel, A good option for this is Bentley Pointools. See the link below: https://www.bentley.com/en/products/brands/pointools https://www.youtube.com/watch?v=jOtUbe6ZvOY
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Mathieu, J'essaie de faire à nouveau des tuiles avec l'outil tile export du PCloud Manager. Ca avait très bien fonctionné avec la précédente version de CCEditor. Mais avec la nouvelle, je n'y arrive...
View ArticleForum Post: RE: CCEditor: DGN ne s'ouvre pas
Hi Oto, Many thanks for your answer. I received the same advice from the support about the recovering. For my DGN, I attached a DWG (which was an export of my DGN for my client) in reference in a new...
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Salut Alicia, As-tu un élément texte dans chaque tuile? Est-ce que des tuiles sont concaves ou convexes? Quel type d'élément utilises-tu? Aussi je crois qu'il est préférable que tous les points d'une...
View ArticleForum Post: RE: CCEditor: DGN ne s'ouvre pas
Oto suggestion is good also, rename or move your file in a different location will do the same. By doing that the STM manager will lose the location of the original STM (it should appear in red in STM...
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Mathieu, J'ai utilisé la même grille de tuiles que la fois où ça a marché, sans modification particulière. Oui il y a un texte dans chaque tuile. Après je ne sais pas si elles sont concaves ou...
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Est-ce que ton .dgn est en écriture?
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Alors, Oui, le DGN est en écriture, j'y ai travaillé toute la journée et fait tout un tas de modifs.
View ArticleForum Post: RE: ContextCapture Connect Edition 9, UniqueMeshExport tool now...
1) Not yet....And by then the workflow will be different. The bounding box is included because the clipping is done exactly now, even in Uniquemesh, if a polygon is given for the production (that...
View Article
