Forum Post: RE: Has anyone tested performance of CC Engine with AMD Graphic...
I did. However, it's not an option for me due to budget problems.
View ArticleForum Post: Context Capture Editor 3D to 2D to Autocad
Hi, I'm relatively new to CCE and Microstation. I am learning to create drawings from pointclouds with the plan to offer as-built drawings to architects. I have cut sections through my pointcloud,...
View ArticleForum Post: RE: shift model
The total error is no more than 100mm. Such accuracy is achieved only with the exact coordinates of the image centers. Errors exceeding 100mm only with poor gnss measurements.
View ArticleForum Post: RE: shift model
Uh huh .. This is from a phantom 4 pro .. no RTK/PPK. Static GPS surveys at 2 hours plus per control point for global reference frame .. tied back to CORS reference stations .. internal control from a...
View ArticleForum Post: RE: shift model
You have reference points, they do not give information about the errors of the result.
View ArticleForum Post: sienna2506
For your information there is a new version of the mobile app on Natasha Jain
View ArticleForum Post: RE: LiDAR with photogrammetry
There is setting to use point cloud were available and geometry from photos where there is no LIDAR data. So you can do it in one reconstruction.
View ArticleForum Post: RE: context capture app issue after the upgrade
what Context Capture Center version (build number) do you use? Best cars
View ArticleForum Post: RE: shift model
You should also leave some as check points. The results seem to be too good and often it means that model is broken in seams.
View ArticleForum Post: RE: shift model
There is also an option to set origin constraint but unfortunately it only allows to set it at zero. It would be easy to shift model by using this constraint if we could provide any coordinates. Maybe...
View ArticleForum Post: RE: shift model
shifted coordinates by the key of the transition, the result is acceptable (about 5 cm), the customer checked. This technology is a good solution to the problem. Thanks again for the idea.
View ArticleForum Post: 3D Scanning Beginner
Hi! My brother and I were trying to learn more about 3D scanning for additive manufacturing purposes. We had an old Kinect at home so we decided to play around with it, but we had a lot of trouble...
View ArticleForum Post: RE: 3D Scanning Beginner
No problems to pick up coins using photogrammetry - demo.mikrokods.lv/.../index.html
View ArticleForum Post: RE: [Contextcapture Editor] Not usable for real-life model...
I am afraid 3Dsmax also is not able to edit such large meshes.
View ArticleForum Post: Importing mobile scan
HI all, I am trying to import mobile laser scan data as a las file and a trajectory file but context capture comes up with the error "Only 0 valid points, can't build POD (at least 16 required)". Is...
View ArticleForum Post: RE: Importing mobile scan
Try to convert at first LIDAR to POD with free POD Creator - https://www.bentley.com/en/resources/software/bentley-pointools-podcreator Internally Contextcapture uses POD for point clouds. Problem it's...
View ArticleForum Post: RE: Importing mobile scan
Looks like the only options to import mobile scans are e57, las and laz.
View Article