Forum Post: RE: [v8i SS4] Point cloud is not displayed
What product are you using? V8i based products by default try to use DX11 for rendering views. You may have to set the program to use DX9 specifically. See:...
View ArticleForum Post: RE: Process to take LiDAR to 3SM
Perhaps the following video would help: https://www.youtube.com/watch?v=JhqAntx3xPU Are you using only the point cloud to create the 3SM or do you have some images used as in the production?
View ArticleForum Post: RE: Process to take LiDAR to 3SM
Thank you David. I'll review the video shortly. I have a single hi-res ortho image (ECW) that would be great if I could incorporate it into the 3sm, but do not have a full image capture project...
View ArticleForum Post: RE: Process to take LiDAR to 3SM
Hi David, I reviewed the video. The steps I have taken, given the data I have (PointCloud only), are the same as the video. ContextCapture now offers two PointCloud import settings. As I have a single...
View ArticleForum Post: RE: Issue to import *.las in to CC - "Only 0 valid points, can´t...
Dear Cyril, Thank you so much, for your time to find the issue, I will check the differences to learn what it´s happening. Best regards from Chile! :)
View ArticleForum Post: RE: Slanting section after AT - what is this? How do you fix?
Hi Brett, I recently processed images shot with the Parrot Anafi drone. We flew four circular flights, like interlocking rings. The initial AT results had several slanted solutions mixed together like...
View ArticleForum Post: RE: Slanting section after AT - what is this? How do you fix?
Does it have fisheye lens?
View ArticleForum Post: RE: Process to take LiDAR to 3SM
Hi Michael, ContextCapture should only be used for full 3D reality mesh. It also requires the scanner position for each points for optimal results, something you may not have in your dataset. If you...
View ArticleForum Post: RE: Slanting section after AT - what is this? How do you fix?
Hi Ron, I will give this a try. Thank you soo much for your idea on this. I'll let you know how it goes. Thanks, Brett
View ArticleForum Post: SIG Virtual Workshop: Bentley Reality Modeling for North America...
Join Casey Bentley and industry colleagues on Thursday, October 4, at 2 p.m. EDT for the kick-off of Bentley’s Reality Modeling Special Interest Group virtual workshops for North America. You’ll learn...
View ArticleForum Post: RE: Slanting section after AT - what is this? How do you fix?
Oto, I left the camera model type as Perspective. It has a wide angle lens. The EXIF info lists the focal length as 4 mm (35 mm focal length = 23 mm). Here's an example photo.
View ArticleWiki Page: Extracting logs for Technical Support when upload is failing in...
Steps: 1) Open the backstage. 2) Open the “Help” page. 3) Click “Export Logs” 4) Select the data when the upload failure occurred. 5) Save the log and send it to Bentley Technical Support.
View ArticleForum Post: [CONTEXT CAPTURE] - Sudden changes in level within the...
Morning, Not sure if that question was asked previously, but I am having issues with the reconstruction model of an aerial survey. I am reconstructing a survey of an area of about 400x200m with 6 GCPs...
View ArticleForum Post: RE: [CONTEXT CAPTURE] - Sudden changes in level within the...
The change in elevation can be up to 2m.
View ArticleForum Post: Context Capture 3D view
Hello, I am beginner (student) with Context Capture. I cannot display 3Dmodel or 3Dmesh or any other product in 3Dview window "The 3D view is not available for this production format" Do you have idea...
View ArticleForum Post: RE: Context Capture 3D view
Hi Mirka The Acute 3D viewer will only display 3mx or 3sm models. What format are you producing? That also applies to the 3D view tab in CC Master. This tab will, however, show your loaded photos (if...
View ArticleForum Post: RE: Slanting section after AT - what is this? How do you fix?
Looks "fishy" enough so try fisheye lens setting. I thing tangential distortion was setting before CC introduced fisheye lens support.
View ArticleForum Post: RE: [CONTEXT CAPTURE] - Sudden changes in level within the...
Very typical results in Contextcapture when GCP or data has issues. If AT results with GCP is too good to be true then this broken model is expected. What is the source of photos? How it was acquired?...
View ArticleForum Post: AT failed during keypoint extraction
Hi I have 10 aerial photos and want to create an AT, but it fails during keypoint extraction. The 10 photos are divided into 10 photogroups with one photo in each group. Could that be the problem and...
View ArticleForum Post: RE: AT failed during keypoint extraction
Why do you create one photogroup for each photo?
View Article