Forum Post: RE: Question About ContextCapture Point Cloud Details & Settings
I will make some test with aerotriangulation settings, thanks. I would appreciate if someone from Bentley could suggest some. Photos were all in focus, result is good with other software and great with...
View ArticleForum Post: Hybrid productions using photos and scans
I am attempting to produce a model using inputs from Topcon GLS-2000 laser scans exported as .e57 and photos acquired with a DJI drone. I have followed the suggested workflow of running an AT on the...
View ArticleForum Post: AT failed during Point cloud preprocessing
Hi all, I am using CC v10 and I keep trying to run an aerotriangulation using the point cloud for adjustment. I have successfully done this with other projects for the same LiDAR data. I have recently...
View ArticleForum Post: How to create a keyboard Shortcut for the Reality Model...
Hi is there a keyboard shortcut for moving forward and backwards in section view? Or how to create a shortcut? Otherwise you have to click to the icon everytime which is annoying!!
View ArticleForum Post: RE: Hybrid productions using photos and scans
Hi Nick, The scans and image block do have to be in the same spatial location to work. As this is the case if you do not have GCPs you will have to take 'fake GCPs' from the scan data and add these to...
View ArticleForum Post: RE: AT failed during Point cloud preprocessing
Hi Julianna, The reason that we normally see this failure is due to the size of the scan data, as the AT has to preprocess the data your computer might be running out of memory due to its size. If you...
View ArticleForum Post: RE: Hybrid productions using photos and scans
Thanks very much for that Jed. I managed that in fact and it worked. Is it ok to use very bad GCPs to get the photos and laser scan into the same space together, and then the AT will tighten it all up?...
View ArticleForum Post: Hepl for Mavic 2 camera param.
Morning all Please advise on the recommended sensor size for the Mavic 2 pro.(see attachment) Thanks Alexey
View ArticleForum Post: RE: Hepl for Mavic 2 camera param.
Phantom 4 pro has sensor 13.2mm 1". M2P has 25.4mm?
View ArticleForum Post: RE: Hepl for Mavic 2 camera param.
I found a site that says the sensor size is the same as the Phantom 4 Pro, so If that's the case use 13.2mm
View ArticleForum Post: RE: Hepl for Mavic 2 camera param.
Sounds like the same sensor that is in the Zenmuse X4S..(it would make sense to reuse the same great sensor in everything..) I found a comment from someone on another Brand Software forum to use...
View ArticleForum Post: Missing camera model "UltraCam Osprey Mark 3 Premium f120"
Hi all. I am trying to build some models from vertical and angled aerial photo's. The photo's has been aquired with "UltraCam Osprey Mark 3 Premium f120" which takes pictures in 5 directions. I am...
View ArticleForum Post: RE: 3MX Files
You need to have the exact same SRS origin in both models for the merging to work. Make sure that in the production stage you check that the origin is the same, and if not enter a custom origin (in...
View ArticleForum Post: Hello, I get an error stating "MDL Loader: Could not load...
Hello, I get an erro stating "MDL Loader: Could not load application DCARTES.MA". How can I get rid of this error? Please Help!
View ArticleForum Post: RE: Hello, I get an error stating "MDL Loader: Could not load...
Hi Jalen, It seems like Descartes is not installed probably. Have you tried to reinstall the application you are using? Thanks, Mathieu
View ArticleForum Post: How to run context capture railway steel bridge ?
Hi, I have 4500 images , I want to create 3D model , I tried part by part run images in context capture. out put was not good. any one can suggest for good result in context capture modelling.
View ArticleForum Post: RE: Hepl for Mavic 2 camera param.
Hi I'm also mavic 2 pro user. Did you ever have this kind of problem when importing the photo into the contextcapture? This is really a huge problem for me since the model cant use photo gps to create...
View Article