Forum Post: RE: Failed during Photos Pairwise matching.
Hi Julianna, Log file shows that there is not enough memory left! You may have to reduce the tile size and then resubmit. Also make sure that you have enough disk space. Also, keep in mind that when...
View ArticleForum Post: RE: Failed during Photos Pairwise matching.
Hi Bruneau, That does make sense! I had my target RAM usage to 27 gb with a total of 32 gb of RAM in that particular node. I have a threadripper with 64 gb, but that just runs an AT engine, but the...
View ArticleForum Post: RE: Failed during Photos Pairwise matching.
Hi Julianna, Let me know then if this solve your issue. Regards, Bruneau
View ArticleForum Post: RE: Processing orthophotos/facades/orthoplanes in Context Capture...
Mathieu, this issue is still plaguing us. CCE has proved to be a real headache for us, what is our best option for getting support to resolve this outside of the forum? Thanks, Brendon
View ArticleForum Post: Export of Contextcapture point cloud or 3D mesh to Autocad
Hi, I'd like to export a point cloud file or a 3D mesh file from Contextcapture to Autoacad Map 2018. I'd like to know in which format I have to export a production mesh in order to import it to...
View ArticleForum Post: RE: Export of Contextcapture point cloud or 3D mesh to Autocad
To view the model in AutoCAD you can produce a point cloud in LAS format. You should then be able to use Recap to convert to a format that AutoCAD can view
View ArticleForum Post: Is there a way to force the result of the aerotriangulation that...
Hi, For a job I must generate a flat orthophoto generated from a film. The film is about a concrete wall under water. I've set the block type to "Vertical views only" There are no servey points...
View ArticleForum Post: RE: Processing orthophotos/facades/orthoplanes in Context Capture...
Please go to https://connect.bentley.com and log in to create a service request. Bentley Technical Support will then assist further
View ArticleForum Post: RE: Is there a way to force the result of the aerotriangulation...
Hi Werner, Create a service request for this issue ( https://connect.bentley.com/ ) and one of us will look at it. Regards, Bruneau
View ArticleForum Post: RE: Failed during Photos Pairwise matching.
This worked. I resubmitted that tile with only the engine running off the threadripper with 64 gb of RAM and it completed it. Now I know I am setting my max RAM usage too high. Thank you very much...
View ArticleForum Post: RE: Processing orthophotos/facades/orthoplanes in Context Capture...
Hi Felix, Moved to Update 3 but still running into the same issue. Ticket has been logged. Thanks, Brendon
View ArticleForum Post: RE: Failed during Photos Pairwise matching.
Hi Bruneau St-Jean, I have the same issue for some tiles in my production. I have 64 gb RAM and the spatial framework shows that the maximum RAM usage for a job 8.4GB. Here is the log. Thank you in...
View ArticleForum Post: Failed during Photos Pairwise matching
I have 64 gb RAM and the spatial framework shows that the maximum RAM usage for a job 8.4GB but sill some of the tiles failed. it shows: Failed during Photos Pairwise matching. Here is the log:...
View ArticleForum Post: edit production destination, moving all ContextCapture project...
I'm moving all my ContextCapture onto an external hard drive. I'm wondering once I moved them will I still be able to do the production under the reconstruction block or AT that I created before? Is...
View ArticleForum Post: RE: CONTEXT CAPTURE
You have to use Contextcapture Editor and use ground extraction tool. Seems in future it could be automatic detection of objects - https://www.youtube.com/watch?v=SMCRzvsxlZc&t=6s Some examples...
View ArticleForum Post: RE: Is there a way to force the result of the aerotriangulation...
You need to pre-calibrate camera, ideally using some swim around known object under-water. Under water introduces additional distortions so you may need to adjust settings and allow tangential...
View ArticleForum Post: RE: Failed during Photos Pairwise matching
There is some cache which need to be deleted. communities.bentley.com/.../482358
View ArticleForum Post: RE: edit production destination, moving all ContextCapture...
Afterwards you need to use fix path under Project->Reference manager and you are good to go.
View ArticleForum Post: RE: edit production destination, moving all ContextCapture...
Hi Oto, I didn't find "fix path" under Project->Reference manager. is it an automatic process or a manual process?
View ArticleForum Post: RE: Failed during Photos Pairwise matching
I have uninstalled CC and delete everything I can find in my C drive related to CC. Then reinstalled the CC. could u be more specific on where are the cache?
View Article