Forum Post: RE: Setting or importing photo pose / position metadata in...
you can import the txt file from the photo tab on top right side there is "import position" then follow then wizard... be sure the photo id in your txt file is the same of the photo imported in...
View ArticleForum Post: RE: Geometric Simplification Units
I read again your question and I saw your input data is point cloud....so my answer was no good... you could import point cloud data and make another point cloud production putting a bigger point...
View ArticleWiki Page: After installing 2 NVIDIA 1080ti graphics cards the Vulkan Multi...
Product(s): ContextCapture Version(s): 04.04.07.68 Environment: Windows 7 64 bit,Windows 8/8.1,Windows 10 Area: N/A Subarea: N\A Problem Description You have installed 2 NVIDIA 1080ti graphics cards...
View ArticleForum Post: RE: Grid computing - spread workload
I followed the same instruction to run grid computing in interconnected system in a same LAN. When i submit job in master, node engine showing ignoring job ; project not found continuously. How to...
View ArticleForum Post: How to Check Node System engine is utilized for 3D reconstruction...
Dear All, I have installed Context Capture center ( Engine+Master ) in 3 system interconnected in same LAN. They are running windows10 pro 64 bit. I shared the JOB through network mapping. How i know...
View ArticleForum Post: RE: 3MX Files
Dear Jerard, I am writing to inform you that I have the same problem. I produced two productions which they have overlaps, but when I want to merge them according to your mentioned link, the "Failed to...
View ArticleForum Post: RE: 3MX Files
Dear Jerard, I have the same problem. I have two different productions which they have overlaps. I followed the steps in your mention link, but when I wanted to run the merged production the "Failed to...
View ArticleForum Post: RE: 3MX Files
Hi Saeid, The error you're experiencing is normally due to an error in the merge file you have created. Have you checked the link above and does your file look similar to the example? Most of the time...
View ArticleForum Post: RE: 3MX Files
Dear Jerard, Thank you very much for your response. I have already merged two productions, but they had not overlaps together. But this time their tiles have overlaps and the mentioned error appeared....
View ArticleForum Post: RE: 3MX Files
Saeid, I have just had a look at your text and it does look to be correct as this is the case the only advice I can offer is that yo put in a service request and technical support will take a look at...
View ArticleForum Post: Reconnecting photos in Context Capture.
Hello everyone, I am new to Context Capture so please be gentle. I am building my first test project and ran out of disk space as I am using portable drives. I have purchased a large drive to continue...
View ArticleForum Post: RE: Reconnecting photos in Context Capture.
Okay up under project in the menu I found the reference manager where I was able to reconnect files. I have the solution on my own. I did not find this in the manual but may have missed it. Thanks for...
View ArticleForum Post: CCEditor: Texts on a grid of points on terrain
Hi, I watched the video "how to create a grid of points on terrain", I did it, and it worked really well. Now, I would like to add a text (the Z coordinate) on each point created. How can I do it...
View ArticleForum Post: RE: CCEditor: Texts on a grid of points on terrain
While using the Place Point tool rather than placing an element try placing a cell that contains a field that reports the z height of the cell
View ArticleForum Post: RE: CCEditor: Texts on a grid of points on terrain
Hi David, Yes, I tried this before choosing to place points. The program stops itself when using cells. I thought it was about the "density" of the cells. I started with one cell every 2 meters, the...
View ArticleForum Post: RE: "Failed to read the projec"
Please try using the attached. Keep a backup copy of the original. communities.bentley.com/.../jx-_2D00_-Copy.zip
View ArticleForum Post: Pointools, some coments on stuff I'm going trough as new user.
Hi. Been testing pointools. Pros--> Can handle really big datasets, uploaded a 780M point cloud and handles it really well, but. you cant do much with it aside from doing a video. I find overall...
View ArticleWiki Page: Descartes for MicroStation CONNECT Edition Installation
Product(s): Bentley Descartes for MicroStation Version(s): 10.04.00.46 Environment: N\A Area: N/A Subarea: N\A Descartes for MicroStation CONNECT Edition Installation Background Descartes for...
View ArticleForum Post: RE: How to recreate the inside of a room using context capture?
if you used a multi-camera rig you, i think you should not leave "None" in photogroup setting...try with "Main" and please let me know if it works...i never used a multicamera rig...
View Article