Forum Post: ContextCapture:The aerotriagulation was failed.
With the same project，it successes when we only use one node ,but it failed when we use two or more nodes to run the aerotriagulation. The interface of engine shows that:
View ArticleForum Post: RE: Aerial data captured at different heights
not at all. But may require user tie points if the scale factor differs too much.
View ArticleForum Post: RE: camera database samsung s8+ from where can I get the data...
It is not mandatory to have camera parameters. Better use without than provide wrong values. Sensor size:4mm Focal:26mm
View ArticleForum Post: RE: D-RTK GNSS in Context Capture
Contextcapture doesn't support RTK yet but could use known image positions. You should set that metadata is precise when doing aerotriangulation. However if the data will not be correct it may fail.
View ArticleForum Post: Ground Control Points
I was recently looking at working on a Reality Model project for a stretch of 10 Km of Highway using a DJI Inspire 2 drone. I was wondering if you could help me with the number of ground control points...
View ArticleForum Post: [Contextcapture] point cloud size limit
The current 500M points size limit in ContextCapture non-Center edition is too low. This is helping Autodesk Recap sales as in case when large merged E57 point cloud(exported from ReCap) is received...
View ArticleForum Post: RE: Ground Control Points
Hi Gordon, Ideally you want as many as you can and should have them well spread. There is no limit on how many you can have, however the more you have the better the accuracy. Please ensure that you...
View ArticleForum Post: Point Cloud visulatisation - Microstation
How can I set Microstation to highlight the pointcloud as in this video: https://www.youtube.com/watch?v=tZlW5yqIdhc&t=38s Like it making the pointcloud turn red at the section or cut volume limit....
View ArticleForum Post: RE: Point Cloud visulatisation - Microstation
from the 0.42minute to 1.15 minute of the movie approximately
View ArticleForum Post: RE: ContextCapture 3D Mesh Export to Civil 3D
For civil 3D, make your sure your FBX file are small (like 9meg max) you may need to reduce your tiling. Civil 3D does not read the texture from the FBX you will have to use an other software like...
View ArticleWiki Page: Highlighting the cutting edge of the clip plane in a clip volume
Product(s): Bentley Descartes CONNECT Version(s): N\A Environment: N\A Area: N/A Subarea: N\A I want to set MicroStation to highlight the point cloud making the edge turn red at the edge of the section...
View ArticleForum Post: RE: Point Cloud visulatisation - Microstation
Please see the link to the Wiki below: https://communities.bentley.com/products/3d_imaging_and_point_cloud_software/w/wiki/37819/highlighting-the-cutting-edge-of-the-clip-plane-in-a-clip-volume
View ArticleForum Post: RE: Ground Control Points
Thank you Felix! Let's say we are looking for the bare minimum GCP's. How would we go about with it? We do not want to fall short and then have the model turn out to be a mess and we do not want to...
View ArticleForum Post: RE: CC mobile app fail
I will contact folks here to see what can be done to get access to the mobile app. Thanks for the input.
View ArticleForum Post: RE: Ground Control Points
Hi Gordon, I own two drones. An Ebee RTK and a DJI Mavic Pro. I recently surveyed a road with my Ebee RTK. 7.5km x 200m of surface, 65m height, one flight direction (along the road). I did 7 flights. I...
View ArticleForum Post: [Descartes] Key-in to Move sections forward\backward
Hello, Using Descartes in OpenRoad Desinger CONNECT - what are the key-ins to move the sections back an forth? Had this set up in the previous version and worked great. Right now stuck selecting cross...
View ArticleForum Post: RE: Step by step Reality Mesh Photo Navigation Sneak Peak
Is there a tutorial or step by step guide on how to use this function and how to create the web presentation that is demonstrated in this video: https://www.youtube.com/watch?v=ZF1_UY3uBCw The help...
View ArticleForum Post: RE: Ground Control Points
Hello Alicia, Thank you so much for your feedback! Gives us a better insight for our projects. I noticed you mentioned that you surveyed a bridge using your drone? We are a company based here in Dubai...
View Article