Forum Post: RE: I need to build a point clouds from the several tiled...
Thanks Mathieu, The convert function is included in context capture connect edition Editor? Where can i find it?
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Hi Manuel, The convert function is a MicroStation function that should be shipped with PowerDescartes, it might also be shipped with ContextCapture Editor. HTH, Mathieu
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Hi Mathieu, Thanks for the trick. Really cool to know it. Here is the convert function in CCEditor: The line "multiple output" doesn't appear. How can I make it available?
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Dear Alicia, I have used the Mathieu's procedure and yours also, both are the solution that i was looking for, the Mathieus one is faster, but i also have learned yours, thanks a lot.
View ArticleForum Post: 3SM Tile to Terrain Not working?
Trying to create tile terrain model from 3SM file but getting message "The scalable mesh is not a terrain"
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Hi Alicia, Is it possible you just chose one file? I think the option only appears if multiple files to convert are selected. HTH, Mathieu
View ArticleForum Post: RE: 3SM Tile to Terrain Not working?
Hi Danny, If your 3SM has been generated by ContextCapture it cannot be tile because ContextCapture generates 3D 3SM (containing terrain + objects). What you can do is to first extract the terrain with...
View ArticleForum Post: SIG Virtual Workshop: Bentley Reality Modeling - May 15, 2018 -...
Learn about all the latest features of ContextCapture at the next complimentary Bentley Reality Modeling Special Interest Group virtual workshop on Tuesday, May 15, 2018 at 9 a.m. CET. Register today !...
View ArticleForum Post: Selecting tiles for production from 3d view
I am trying to select tiles for production using the 3d view This has always worked in the past but now I can't select one or more tiles with the latest version on CC. Has anyone run into this issue. I...
View ArticleForum Post: Contextcapture editor 匯入外部 obj 進行 retouching 問題
各位好 目前使用Editor匯入obj進行模型重建 下圖為修補之前 匯入下圖平面OBJ進行補破洞 使用into mesh功能進行融合 補完之後如下圖 牆面已完整 但是畫面放遠之後如下圖 牆面出現破碎灰色牆面 (試過將匯入OBJ先行貼皮 但是放遠觀看一樣有灰色破面問題) 請教以上問題建議如何處裡呢? 謝謝!
View ArticleForum Post: Issues with a produccion after reconstruction
Hello, it's my first reconstruction from an aerotriangulation using the import positioning from IMU data for the photos position. Unfortunately i have no another aids to perform the aerotriangulation....
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Hi Mathieu, No, I selected all the files...
View ArticleForum Post: RE: 3SM Tile to Terrain Not working?
Hi Mathieu, I tried what you said but still no success - now says "No valid element found in model". How is the best method for creating a terrain model from context capture? To capture the breaklines...
View ArticleForum Post: [Contextcapture] Free up disk space tool
What this tool does the help lacks any detail. What temporary files are cleaned? Is it safe to use before archiving project only or also active project? Can it also delete orphaned productions(which...
View ArticleForum Post: RE: I need to build a point clouds from the several tiled...
Hi Alicia, Hmm that is strange. What is the behavior? Does the convert tool output separate files? Have you tried the convert tool directly in MicroStation? Thanks, Mathieu
View ArticleForum Post: RE: Contextcapture editor 匯入外部 obj 進行 retouching 問題
You don't need to actually replace the wall. Just clip holes were the artifacts are and they will be later filled by CC automatically.
View ArticleForum Post: RE: Contextcapture editor 匯入外部 obj 進行 retouching 問題
您好 您的意思是使用drop element 之後 再以element select進行封孔嗎？ 我有試過上述方法但是似乎更容易造成更多模型皺折以及貼皮翻面變成透明的問題⋯⋯ 請問有更詳細的操作說明嗎？ 感謝您
View ArticleForum Post: RE: Selecting tiles for production from 3d view
This is not the only issue also selecting tie points option is lost. It seems related to adding of " selection by tie point " option. For some reason in simple selection mode it is now hard to check...
View ArticleForum Post: RE: Contextcapture editor 匯入外部 obj 進行 retouching 問題
Easiest is to use Fence->Delete Fence Contents->Clip. There are some videos it looks easy for small models but for normal/large models Microstation mesh editing tools are not capable to handle:...
View ArticleForum Post: RE: Issues with a produccion after reconstruction
This is because you are using local coordinate system with very large coordinates. In that case model looses accuracy because of floating point decimal rounding. This is what I also noticed that custom...
View Article